[Winpcap-users] losing transmitted packets

[Gianluca Varenni]

Can you reproduce the same issue with the sample WpdPack\Examples-remote\PacketDriver\TestPacketSend in the WinPcap developer's pack?

Have a nice day
GV


From: Imre Magyar 
Sent: Friday, April 16, 2010 11:16 AM
To: winpcap-users at winpcap.org 
Subject: Re: [Winpcap-users] losing transmitted packets


I've tried it on various PC network interfaces, including a 10/100 USB network dongle and 2 different GigE PCI motherboard-based interfaces. Different combinations of PCs and adapters result in a different number of frames getting through, but the number is far less than half in all cases.

 

--I. M.

 

 


--------------------------------------------------------------------------------

From: winpcap-users-bounces at winpcap.org [mailto:winpcap-users-bounces at winpcap.org] On Behalf Of Gianluca Varenni
Sent: Friday, April 16, 2010 1:13 PM
To: winpcap-users at winpcap.org
Subject: Re: [Winpcap-users] losing transmitted packets

 

What kind of network card are you using on the transmitter machine? can you reproduce it with different network cards?

 

GV

 

From: Imre Magyar 

Sent: Friday, April 16, 2010 11:04 AM

To: winpcap-users at winpcap.org 

Subject: [Winpcap-users] losing transmitted packets

 

Hello all,

 

I have a win32 app that calls pcap_send() in a tight loop repeatedly, on the same 1400 byte frame, say 1000 times.

 

The PC is wired directly to an embedded 10/100 network device, but I do have a port aggregating tap device in between for monitoring. There are no switches or hubs involved at all.

 

I'll run the win32 app, and see that only a small fraction (say 500) of the frames are reported as received on the device at the other end.

 

If I run wireshark on the tap device, I see that the receiving device reported the frame count accurately. Only 500 went out on the link.

 

If I run wireshark on the PC on the same interface the app is sending the frames on, I see all 1000 frames.

 

If I insert a small delay in the app between pcap_send() calls (say I call Sleep(1) for a millisecond's worth of delay), all 1000 frames go out on the link, albeit much slower than I'd like.

 

Can anyone tell me what is dropping the frames and why? I'm assuming I'm overrunning some internal transmit buffer somewhere, but I'm at a loss to understand how to recognize it and when to back off. The pcap_send() function never returns with an error.

 

Thanks for any advice,

 

--Imre M.

 


--------------------------------------------------------------------------------

_______________________________________________
Winpcap-users mailing list
Winpcap-users at winpcap.org
https://www.winpcap.org/mailman/listinfo/winpcap-users



--------------------------------------------------------------------------------


_______________________________________________
Winpcap-users mailing list
Winpcap-users at winpcap.org
https://www.winpcap.org/mailman/listinfo/winpcap-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.winpcap.org/pipermail/winpcap-users/attachments/20100416/8f9570ea/attachment.htm